FREE 40-part music theory course!

Flats and sharps


Subscription required!

To view the complete study guide, you will need a valid subscription. Why not subscribe now?

Already have a subscription? Make sure you login first!


Introduction

So far, we have looked at notes with simple letter-names (C, D, E, F, G, A, B). These are the "natural" notes, but there are some notes "in between" these natural notes: flats and sharps.

"In Between"

It might seem strange at first that there can be notes "in between" the natural notes (C, D, E, etc.). The sharp and flat notes really stand out on a piano keyboard - they are the "black notes" and the natural notes are the "white notes".

As you can see from the photo below, there are no sharps or flats between B and C or between E and F.

Sharp, flat, and natural notes on a piano keyboardSharp, flat, and natural notes on a piano keyboard

Tones and semitones

The gap between a natural note and its sharpened version is an interval called a semitone, and the reason that there is no sharp (or flat) note between B and C or between E and F is because these natural notes are already a semitone apart, and so there is no "room" for a sharp or flat between them.

The interval between two natural notes which is large enough to contain a note "in between" - a flat or sharp - is called a tone. Therefore, there are tones between these pairs of natural notes:

  • C and D
  • D and E
  • F and G
  • G and A
  • A and B

Sharps

A note that is sharp is higher than the natural note with the same letter name, lying between the natural note of the same name, and the natural note above. For example, C sharp lies exactly between the natural notes C and D. Similarly, the note between F and G is called F sharp.

Notes that are sharp are indicated by a sharp sign:  Sharp sign

On the stave, we write sharp notes with the sharp sign in front of the note which is to be sharpened, as shown in the following example:

The notation of sharpsThe notation of sharps

We can therefore write out a list of the different natural and sharp notes, in order, from C to C:

C, C sharp, D, D sharp, E, F, F sharp, G, G sharp, A, A sharp, B

The number 12

As you can see, there are 12 notes listed above. This number 12 will return again and again in your study of music theory - look out for it!

Flats

A note that is flat is lower than the natural note with the same letter name, lying between the natural note of the same name, and the natural note below. For example, D flat lies exactly between the natural notes C and D, and similarly, the note between G and A is called A flat.

Notes that are flat are indicated by a flat sign:  Flat sign

On the stave, we write flat notes with the flat sign in front of the note which is to be flattened, as shown in the following example:

The notation of flatsThe notation of flats

As with sharps, there are again 12 different natural and flat notes:

C, D flat, D, E flat, E, F, G flat, G, A flat, A, B flat, B

Naturals

Once you use a sharp sign to make a natural note sharp (or a flat sign, to make a natural note flat), all subsequent notes of the same pitch are also sharps (or flats), even though they don't have the sharp or flat sign in front of them.

The effect of a sharp or flat on following notes of the same pitchThe effect of a sharp or flat on following notes of the same pitch

In order to prevent this from happening (for example, if you want a C sharp followed by a C natural) then we use the natural sign to force a note back to its natural state:  Natural sign

Just like the sharp and flat signs, the natural sign continues to take effect on all following notes of the same pitch, so there is no need to repeat it:

Using a natural sign to cancel a sharp or flat signUsing a natural sign to cancel a sharp or flat sign

We'll soon look at bars and barlines - they also have important effects on sharps and flats. An added sharp (or flat) sign will only last for the duration of a bar, and is effectively "cancelled" by the barline at the end of the bar, just as if you'd used a natural sign.

Equivalents

It has probably not escaped your notice that we've said that there are only 12 notes, and that there are only five black keys on the piano to go with 7 white keys (corresponding to the 7 natural notes). Why is that, when there are so many flats and sharps?

The answer is that some flats and sharps are equivalent.

For example, the note between C and D is both C sharp and D flat; therefore we can say that C sharp and D flat are equivalent. Similarly, E flat is equivalent to D sharp. On the piano, these equivalent notes are played by the same key!

Important: Notice how there is no gap between E and F or between B and C! In fact, if we attempt to sharpen E, to make an E sharp, which is equivalent to F natural. Likewise:

  • F flat is equivalent to E natural
  • C flat is equivalent to B natural
  • B sharp is equivalent to C natural

We'll look much more at equivalent notes (the technical name is "enharmonic equivalent") in a later study guide.


Read more...

With a subscription to Clements Theory you'll be able to read this and dozens of other study guides, along with thousands of practice questions and more! Why not subscribe now?


Revision

Are you sure you've understood everything in this study guide? Why not try the following practice questions, just to be sure!